DBCI Roll Up Doors Series 5000 Wind Certified

DBCI Roll Up Doors Series 5000 - 1Austin Building Systems (BuildMetal.com) discounts the DBCI Roll Up Door Series 5000. Brochure and Installation Guide available below.

 

DBCI Roll Up Doors Series 5000 - 7 DBCI Roll Up Doors Series 5000 - 6 DBCI Roll Up Doors Series 5000 - 5 DBCI Roll Up Doors Series 5000 - 4 DBCI Roll Up Doors Series 5000 - 3 DBCI Roll Up Doors Series 5000 - 2

quote button

General Description

  • Designed to meet stringent building codes in Coastal Regions and Florida
  • Utilizes 12” drums
  • Limited maximum size of 18′ x 16′ or 16′ x 20′
  • Deep engagement guides and windlocks for stronger/better performances

Approximate*: MPH Certification

  • 10’ wide = (150mph)
  • 16’ wide = (140mph)
  • 12’ wide = (150mph)
  • 18’ wide = (130mph)
  • 14’ wide = (146mph)
  • 20’ wide = (120mph)

*For actual test results contact DBCi Commercial Sales at 800.542.0501

Curtain

  • 26-gauge galvanized
  • Grade E hard steel
  • Deep ribbed corrugation with three-rivet windlock attachment
  • 20 standard colors — special colors upon request with upcharge
  • Siliconized polyester Weather X paint over prime coat
  • Wash coat over primer interior side
  • 25-year film integrity warranty — up to 25-year chalk and fade
  • Improved flexible wear strips
  • 5″ of curtain plus wind locks

Bottom Bar

  • 6063-T6 aluminum extrusion
  • 2” x 11/2” galvanized angles with stiffeners
  • Bulb astragal (durometer 75)
  • Stainless steel nuts and bolts

Axle/Torque Tube

  • 1 5/16” O.D. steel axle, 14-gauge (11-gauge on doors 13’6” and larger)
  • Oil tempered torsion springs
  • 16-gauge drums 12” diameter galvanized
  • Shielded steel ball bearings staked in drums
  • Full top sheet 26-gauge galvanized

Guides

  • 12-gauge galvanized steel guide with 12-gauge windlock bar
  • Polyethylene wear strip
  • Bolt on head stop 1/4” plate steel
  • Pre punched for lock and attachment screws

Hardware

  • 13-gauge saddle clamps
  • 10-gauge slide locks 2 per door
  • 16-gauge step plate 2 per door
  • 1/4” steel welded angle T-bracket

Options

  • Chain hoist 4:1 reduction
  • Chain hoist 8:1 reduction
  • Header seal (as pictured to the left)
  • Hood
  • Steel mounting plates
  • Electric operator
  • Insulation (5250)

quote button

Download the DBCI Series 5000 Wind Certified Roll Up Door Brochure in PDF

Download the DBCI Roll Up Door Series 5000 Wind Certified Installation Guide in PDF

Download the DBCI Rollup Door Series 5000 Wind Specifications in PDF

Check out the article:
Things You Should Know About DBCI Commercial Roll Up Doors

Established in 1991